Windshield wiper blades are an essential component of your car, helping to clear rain, snow, and other debris from your windshield so you can see clearly while driving. Over time, wiper blades can wear out and become less effective, so it's important to replace them regularly. In this guide, we'll show you how to install windshield wiper blades so you can enjoy a clear view on the road.

Step 1: Determine the Correct Wiper Blade Size

Before you start, you'll need to determine the correct wiper blade size for your car. This information is usually available in your car's owner's manual or can be found online. If you're unsure, you can also check the size of your existing wiper blades.

Step 2: Remove the Old Blades

To remove the old wiper blades, simply lift the arm away from the windshield and press the tab on the side of the blade. The blade should come away from the arm easily. Repeat this process for the other wiper blade.

Step 3: Attach the New Blades

Once the old blades have been removed, it's time to attach the new ones. To do this, simply clip the new blade onto the arm. Make sure it's securely attached. Repeat this process for the other wiper blade.

Step 4: Test the Wiper Blades

Before you put the wiper arms back on the windshield, it's a good idea to test the new blades. Turn on the wipers and make sure they're working properly and wiping evenly. If they're not, you may need to adjust the blades slightly.

Step 5: Put the Wiper Arms Back on the Windshield

Finally, it's time to put the wiper arms back on the windshield. To do this, simply lift the arm and place it back onto the windshield. Make sure it's securely in place. Repeat this process for the other wiper blade.

And that's it! With these simple steps, you can install windshield wiper blades quickly and easily. Regularly replacing your wiper blades is an important part of car maintenance, helping to ensure a clear view on the road no matter what the weather. Happy driving!

February 06, 2023 — Brian Bray